Carrier phase measurements can only be made in relation to a cycle or wavelength of the L1 or L2 carrier waves because it is impossible to discriminate different carrier cycles (they are all "sine waves" if one ignores the modulated messages and PRN codes). Integrated carrier phase measurements may be made by those receivers intended for carrier phase-based positioning. In this case the change in receiver-satellite distance can be measured by counting the number of whole wavelengths since initial signal lock-on and adding the instantaneous fractional phase measurement. However, such a measurement is a biased range or distance measurement because the initial number of whole (integer) wavelengths in the receiver-satellite distance is unknown. This unknown value is referred to as the "ambiguity". It is different for the different satellites, and different for the L1 and L2 measurements. It is, however, a constant if signal tracking continues uninterrupted through an observation session. If there is signal blockage, then a "cycle slip" occurs, causing the new ambiguity after the cycle slip to be different from the value before. Cycle slip repair therefore restores the continuity of carrier cycle counts and ensures that there is only one ambiguity for each satellite-receiver pair.