- Branche: Construction
- Number of terms: 2218
- Number of blossaries: 0
- Company Profile:
A waterborne urethane that is fully cured and dries by water evaporation. See Polyurethane.
Industry:Construction
Ratio by weight between the water and the cement. Only a small amount of water is needed for hydration and the rest is used to make the concrete more workable. The water/cement ratio controls the characteristics of the paste and ultimately the concrete. Allowance must be made for water in the aggregate when adding water to the concrete batch.
Industry:Construction
A general term describing any distortion in a piece of wood from a true plane.
Industry:Construction
A sheet of material placed at building entrances to remove gritty soil from the soles of shoes. Good mats should also trap soil so it does not get picked up by subsequent traffic. As a general rule, mats should be as wide as the doorway and ideally 8' to 12' long.
Industry:Construction
A property of fluids, either liquid or gaseous, that can briefly be described as causing resistance to flow. Viscosity is the measure of the combined effects of cohesion and adhesion. It is one of the most important physical properties of an oil, varnish or lacquer. Viscosity is usually measured with the GardnerHoldt Bubble Viscometer.
Industry:Construction
Polyvinyl chloride (PVC) which has been polymerized from vinyl chloride monomer into a powdery form for mixing with other ingredients to form rigid vinyl (as found in house siding, PVC pipe, credit cards, etc.) or plasticized vinyl (as found in shower curtains, pool liners, and of course, floors!).
Industry:Construction
A resilient tile floor covering composed of binder, fillers and pigments compounded with suitable stabilizers and processing aides. The binder consists of polymers and/or copolymers of vinyl chloride, other modifying resins, and plasticizers. The tile meets requirements of ASTM F 1066, Standard Specification for Vinyl Composition Floor Tile.
Industry:Construction
An obsolete form of resilient tile composed of vinyl plastic binders, chrysotile asbestos fibers, mineral fillers and pigments.
Industry:Construction
A finish that contains either natural or synthetic oils that are refined by boiling and cooking with the addition of dryers. Slow to cure, but can be accelerated by the addition of heat. When used as a sealer, it is often burnished with a buffer and pads, the friction of which accelerates the curing process. Ambers well, somewhat stain and spot resistant, but may be scratched easily when new due to slow curing time.
Industry:Construction
a.) A material, such as foil, plastic film or specially coated paper, with a high resistance to vapor movement, used to control condensation or prevent migration of moisture. b.) Any material used to stop the migration of vapor through walls, floors or ceilings.
Industry:Construction
