- Branche: Telecommunications
- Number of terms: 29235
- Number of blossaries: 0
- Company Profile:
ATIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards for the information, entertainment and communications industry.
In communications security systems, a security penetration technique that makes use of the negative-acknowledge transmission-control character and capitalizes on a potential weakness in a system that handles asynchronous transmission interruption in such a manner that the system is in an unprotected state against unauthorized access during certain periods.
Industry:Telecommunications
In communications networks, a device that (a) links or routes signals from one ring or bus to another or from one network to another, (b) may extend the distance span and capacity of a single LAN system, (c) performs no modification to packets or messages, (d) operates at the data-link layer of the OSI--Reference Model (Layer 2,) (e) reads packets, and (f) passes only those with addresses on the same segment of the network as the originating user. 2. A functional unit that interconnects two local area networks that use the same logical link control procedure, but may use different medium access control procedures. 3. A balanced electrical network, e.g., a Wheatstone bridge. Note: A bridge may be used for electrical measurements, especially resistances or impedances. 4. See hybrid coil.
Industry:Telecommunications
In communications network operations, a record that indicates the interconnections between pairs of nodes in the network, and is used to produce direct routes, alternate routes, and available route tables from point to point.
Industry:Telecommunications
In communications cables--including fiber-optic cables--having the transmission media wrapped helically around a central member, the longitudinal distance along the cable required for one complete helical wrap; i.e., the total cable length divided by the total number of wraps. Note 1: In many fiber-optic cable designs, the lay length is shorter than in metallic cables of similar diameter, to avoid overstressing the fibers during the pulling associated with the installation operation. Note 2: The wraps, i.e., turns, that are referred to should not be confused with the twists given twisted metallic pairs, i.e., wires, to reduce electromagnetic coupling. Pairs of optical fibers are not given such twists. Synonym pitch.
Industry:Telecommunications
In an oscillator, the continuation of oscillations after removal of the control stimulus. Note 1: The flywheel effect is usually caused by interacting inductive and capacitive circuits in the oscillator. Note 2: The flywheel effect may be desirable, such as in phase-locked loops used in synchronous systems, or undesirable, such as in voltage-controlled oscillators. Synonym flywheeling.
Industry:Telecommunications
In communication, the emission of energy in the form of electromagnetic waves. 2. The outward flow of energy from any source in the form of radio waves.
Industry:Telecommunications
In communication systems, the time interval from initiation of a clearing signal by a terminal until the available-line condition appears on originating terminal equipment.
Industry:Telecommunications
In communication systems, the location at which the standards for the interface parameters between a terminal and the line facility are implemented.
Industry:Telecommunications
In communication network timing subsystems, free-running precision clocks used, for synchronization purposes, at the nodes. Note: Variable storage buffers, installed to accommodate variations in transmission delay between nodes, are made large enough to accommodate small time (phase) departures among the nodal clocks that control transmission. Traffic may occasionally be interrupted to allow the buffers to be emptied of some or all of their stored data.
Industry:Telecommunications
In common-channel signaling, the effect on a traffic circuit of the arrival at a switching center of an abnormally delayed call control signal relating to a previous call, while a subsequent call is being set up on the circuit.
Industry:Telecommunications
